Industrial serial port server series products, mainly realize the data transmission between Ethernet and serial port (RS-232/RS-485/RS-422), it integrates the TCP/IP protocol stack, RS-232/RS-485/RS-422 devices that are not connected to the Internet can also be easily, flexibly and quickly connected to Ethernet. The series of products use high-performance ARM chip to ensure stable data transmission; Support a variety of working modes to meet different application requirements; Excellent anti-interference performance, suitable for harsh industrial environments.
● Support 2-way 100Gb Ethernet interface and 8-way TTL UART
● Support serial terminal device networking, can convert UDP, TCP, Modbus, HTTPD, MQTT and other protocols, support for virtual serial port
● Support Modbus slave pre-reading, single port automatically learns up to 256 RTU or 128 ASCII commands, pre-reading data to achieve rapid response.
● Compact structure and small size, easy to install, maintenance and PCB board.
● Supports DC3.3V power input.
● Wide temperature range of -40~85℃ to meet the needs of industrial environments
Software | ||||
Working Mode | Support Modbus RTU Master, Modbus RTU Slave, Modbus ASCII Master, Modbus ASCII Slave, UDP Client, UDP Server, UDP Multicast, TCP Client, TCP Server, RealCOM_MCP, RealCOM_CCP, RealCOM_MW, Pair Connection Master, Pair Connection Slave, HTTPD Client, WebSocket Client, MQTT modes Support serial to serial port data forward Support SSL encryption, data encryption, transparent transmission/JSON transmission Support Modbus slave virtual address, Modbus readahead, Modbus address mapping batch read/write Support Keepalive, heartbeat package, registration package, head and tail of a frame, RFC2217 | |||
Secure Management | Support password setting Support WEB/ SSH/ TELNET/ HTTPS access control Support IP/ MAC address filter Support alert via Email and SNMP Support certificate upload | |||
System Management | Support device information, serial port information statistics Support independent segment or cascade mode, static address/DHCP Local sys log, remote lot, export log via Serial Port Support SNMPv1/v2c/v3 Support serial port restart, connection reset after idle for some time Online reboot, upgrade and factory reset Support NTP | |||
Interface | ||||
Ethernet | 2×10/100Base-T(X) auto-sensing Ethernet pin, full/half duplex, auto MDI/MDI-X connection, 1.5 kV isolation protection, built-in Ethernet transformer | |||
TTL | Number: 8 Type: 3.3V TTL UART (use an external serial port chip to get the extra RS232/485/422 COM port you need) Baud rate: 300bps-460800bps Data bit: 7bit, 8bit Stop bit: 1bit, 2bit Parity bit: None, Odd, Even | |||
CONSOLE | RS232 signal for debugging and command line configuration | |||
Status LEDs | Support the RUN, Ethernet port Link/ACT, Ethernet port Speed, serial port indicator pins | |||
Power Supply | ||||
Input Voltage | DC 3.3V±3% | |||
Power Consumption | ＜1W@DC3.3V(full load) | |||
Connection | 2×1.27mm pitch 2*25P surface mounted female header (pins included) | |||
Physical Characteristic | ||||
Dimensions | 55×40×9.9 mm | |||
Installations | Embedded mounted | |||
Weight | 25g | |||
Working Environment | ||||
Operating Temp | -40℃~+85℃ | |||
Storage Temp | -40℃~+85℃ | |||
Relative Humidity | 5%~95% (non-condensing) | |||
Industry Standard | ||||
Certification | CE, FCC, RoHS | |||
4.9
12 views
Reviews
★ ★ ★ ★ ★ 16/08/2024
Good service!
(156)
★ ★ ★ ★ ★ 23/07/2024
Good!
(982)
★ ★ ★ ★ ★ 23/07/2024
Good quality!
(982)