1/2.9-inch active pixel CMOS sensor
Built-in timing adjustable circuit, H driver, V driver and serial communication circuit
Global exposure mode
Readout Mode:
All-pixel scan mode
ROI mode
Vertical/Horizontal - Normal/Flip readout mode
Readout Speed:
Maximum frame rate in full pixel scan mode: 10bit: 120.8 frames/sec
10bit A/D converter
CDS/PGA features:
0-24dB: Analog Gain (0.1dB Steps)
24.1-48dB: Analog Gain (24dB) + Digital Gain (0.1-24dB) (0.1dB Steps)
IO interface: CSI-2 serial data output (1 channel) RAW10 output
Recommended Lens F-Number: 2.8 or above (proximal)
Recommended exit pupil distance: -100mm ~ -∞
Model | IMX297LLR |
Target size | 1/2.9" |
Total number of pixels | 728 (H) × 554 (V), ABOUT 0.4M |
Resolution | 728×544 |
The number of effective pixels | 728 (H) × 544 (V), ABOUT 0.4M |
Number of active pixels | 728 (H) × 544 (V), ABOUT 0.4M |
The number of recommended recording pixels | 720 (H) × 540 (V), ABOUT 0.39M |
Frame rate (fps) | 120 |
Spectrum | Black and white |
Cell size | 6.9μm |
Exposure method | Global shutter |
Enter the frequency | 37.125mhz,74.25mhz,54mhz |
Sensitivity | 3660 mv typical. |
Saturation semaphore | 1001 mv Min |
Aspect ratio | 4:3 |
Interface | MIPI CSI-2 |
Optical Black Zone (OB) | Horizontal: 0 pixels in the front, 0 pixels in the back; Vertical: 10 pixels in the front, 0 pixels in the rear |
Supply voltage | Analog 3.3V, digital 1.2V, interface 1.8V |
Encapsulation | 138 pin LGA |
Technology | Pregius |
">
4.9
12 views
Reviews
★ ★ ★ ★ ★ 16/08/2024
Good service!
(156)
★ ★ ★ ★ ★ 23/07/2024
Good!
(982)
★ ★ ★ ★ ★ 23/07/2024
Good quality!
(982)