1/2.3-inch active pixel CMOS sensor
Built-in timing adjustable circuit, H driver, V driver and serial communication circuit
Global exposure mode
Readout Mode:
All-pixel scan mode
1080p Full HD readout mode
Vertical/horizontal 1/2 subsampling mode
ROI mode
Vertical/Horizontal - Normal/Flip readout mode
Readout Speed:
Maximum frame rate in full pixel scan mode: 8bit: 201.4 frames/second, 10bit: 167.0 frames/second, 12bit: 134.6 frames/second
8/10/12bit A/D converter
CDS/PGA features:
0-24dB: Analog Gain (0.1dB Steps)
24.1-48dB: Analog Gain (24dB) + Digital Gain (0.1-24dB) (0.1dB Steps)
IO interface: low-voltage LVDS (150 mVp-p) serial (2/4/8 channel conversion) DDR output
(594/297Mbps/channel)
(445.5/222.75Mbps/channel in 1080p Full HD)
Recommended Lens F-Number: 2.8 or above (proximal)
Recommended exit pupil distance: -100mm ~ -∞
Model | IMX392LQR |
Target size | 1/2.3" |
Total number of pixels | 1936 (H) × 1226 (V), ABOUT 2.37M |
Resolution | 1936×1216 |
The number of effective pixels | 1936 (H) × 1216 (V), ABOUT 2.35M |
Number of active pixels | 1936 (H) × 1216 (V), ABOUT 2.35M |
The number of recommended recording pixels | 1920 (H) × 1200 (V), ABOUT 2.30M |
Frame rate (fps) | 201 |
Spectrum | Colored |
Cell size | 3.45μm |
Exposure method | Global shutter |
Enter the frequency | 37.125mhz,74.25mhz,54mhz |
Sensitivity | 1146 mv (typical) |
Saturation semaphore | 1001 mv Min |
Aspect ratio | 16:10 |
Interface | Sub LVDS Serial |
Optical Black Zone (OB) | Horizontal: 0 pixels in the front, 0 pixels in the back; Vertical: 10 pixels in the front, 0 pixels in the rear |
Supply voltage | Analog 3.3V, digital 1.2V, interface 1.8V |
Encapsulation | 226 pin LGA |
Technology | Pregius |
">
4.9
12 views
Reviews
★ ★ ★ ★ ★ 16/08/2024
Good service!
(156)
★ ★ ★ ★ ★ 23/07/2024
Good!
(982)
★ ★ ★ ★ ★ 23/07/2024
Good quality!
(982)