TEF1110P-8-63W is an unmanaged PoE switch with 2 uplink ports, independently designed by Tenda. Compliant with IEEE 802.3at/af standards, it can identify PoE-powered devices intelligently. The switch supplies a maximum PoE power output of 58 W, and 30 W for a single port. Featured with extend mode, One-key VLAN and QoS functions, TEF1110P-8-63W is a ideal choice for SMBs, supermarkets and restaurants with small-sized video surveillance requirement.
Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE802.3af/at standards.
8 * 10/100 Mbps Base-TX RJ45 ports for data transmission and power supply,
2 * 10/100 Mbps Base-TX RJ45 ports for data transmission.
1 K MAC address table and MAC address auto-learning.
IEEE 802.3x-compliant full-duplex flow control and half-duplex backpressure flow control.
2 Gbps backplane bandwidth.
Maximum power consumption of a single port: 30 W; Maximum power consumption
of the switch: 58 W.
Supports smart management functions, including extend mode,one-key VLAN and QoS.
Supports desktop and wall-mounting, plug and play
Network standards | IEEE 802.3/3u/3x, IEEE 802.3af/at |
LED Indicator | 10* Link/Ack LED indicators 1 * Power LED indicator |
Interfaces | 8 * 10/100 Base-TX Ethernet ports (Data/Power) 2 * 10/100 Base-TX Ethernet ports (Data) |
Transmission media | Recommended: CAT5/5e UTP or better |
Dimension | 177.5mmx104.0mmx26.0mm |
Level of protection | Lightning protection for ports: 6KV Lightning protection for power: 4KV ESD: Air discharge: ±10kV Contact discharge: ±8kV |
Forwarding mode | Store-and-forward |
Switch capacity | 1.6 Gbps |
Packet forwarding rate | 1.48Mpps |
Buffer | 448K |
MAC address table | 1K |
PoE budget | Single port: AF: 15.4W, AT: 30W Whole device: 58W |
Power consumption | / |
Input voltage | 100-240V AC 50/60Hz 51V /1.25A DC(Power Adapter ) |
Mounting | Desktop mounting: support Wall mounting: support Rack mounting:non-support |
Environment | Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Certification | FCC、CE、RoHS |
Funtions | Default Mode: If Default mode is enabled, the device works as a general switch and all ports support 10/100Mbps auto-negotiation. Extend Mode:VLAN isolation is enabled. Port 1-8 will be isolated respectively (10/100Mbps auto-negotiation), but can communicate with the Uplink port. And the delivery distance of powering and network data is up to 250m (10Mbps). |
4.9
12 views
Reviews
★ ★ ★ ★ ★ 16/08/2024
Good service!
(156)
★ ★ ★ ★ ★ 23/07/2024
Good!
(982)
★ ★ ★ ★ ★ 23/07/2024
Good quality!
(982)