TEG1116P-16-150W is a Tenda PoE Switch that offers 16 10/100/1000Mbps Base-TX RJ45 ports 1-16 comply with IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 135W and can supply power to and exchange data with APs, IP cameras and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN and isolation to help reduce cabling costs of IP terminals like APs and IP cameras.
16*10/100/1000 Mbps Base-TX RJ45 ports
Ports 1-16: IEEE 802.3af/at PoE ports
maximum power output of the switch: 135W
13-inch desktop size, 1U height, rack mountable
Hardware DIP switch for selection among the Standard, CCTV, VLAN, and lsolation modes.
Hardware DIP switch to VLAN ports to prevent broadcast storm and defend against DHCP spoofing.
Network standards | IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/ IEEE 802.3af/IEEE 802.3at |
LED Indicator | 16*Link/Act per device 16*PoE per device 1*Power per device |
Interfaces | 16*10/100/1000 Base-T ports(Data/Power) |
Transmission media | Recommended: CAT5/5e UTP or better |
Dimension | 294.0mmx178.0mmx44.0mm |
Level of protection | Lightning protection for ports: 6kV Lightning protection for power: 6kV ESD: Air discharge: ±10kV Contact discharge: ±8kV |
Forwarding mode | Store-and-forward |
Switch capacity | 32 Gbps |
Packet forwarding rate | 23.6Mpps |
Buffer | 2M |
MAC address table | 8K |
PoE budget | Single port: AF: 15.4W, AT: 30W Whole device: 135W |
Power consumption | / |
Input voltage | 100-240V AC 50/60Hz |
Mounting | Desktop mounting: support Wall mounting: support Rack mounting : support |
Environment | Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Certification | FCC、CE、RoHS |
4.9
12 views
Reviews
★ ★ ★ ★ ★ 16/08/2024
Good service!
(156)
★ ★ ★ ★ ★ 23/07/2024
Good!
(982)
★ ★ ★ ★ ★ 23/07/2024
Good quality!
(982)